Warning line and roof fall protection systems

features
The permanent warning line is a simple and effective way to delimit a perimeter of safety on your roof. The 50 lb recycled rubber base ensures that the posts remain firmly in place and high visibility cables and flags provide all-season safety. Forget rust and overturned posts – the Delta Prevention permanent warning line is designed to last and complies with CNESST standards. In addition, it is 100 % compatible with Delta Prevention's freestanding guardrail system. So you can combine both systems to maximize safety on your roof.
  • Permanent visual delimitation of a security perimeter
  • Modular: can be combined with Delta Prevention guardrails to secure the entire roof at low cost
  • Scalable: can be converted to a guardrail
  • Freestanding: 100 % without perforation
  • Quick and easy installation
  • Compliance report included
  • 10 year warranty *
  • Made in Quebec
  • Meets CBNC, CNESST, OSHA standards

Request For Quote

An error occured. Please verify all the fields.

Please validate that you are not a bot.

Your submission has successfully been sent to MSK!

WARNING LINE - SPECIFICATIONS
 
 
 

Converting your warning line systems to a guardrail

Obviously, your needs will change over time. That’s why we’ve developed a warning line systems that can easily be converted to a roof guardrail with 100 % shared components. By replacing steel cables with our traditional aluminum tubes, we are transforming visual protection into complete fall protection for a fraction of the cost!

permanente_warning_line_setup.jpg

VSS SAFETYLINE

– for Canadian Building Standard (Comply with Quebec OHS)

In this configuration, the VSS SafetyLine have one base per vertical post. The posts at the ends of the bump line must have two bases.The maximum spacing between two posts is 8′ and only one yellow nylon flag is required between the vertical posts. This is the configuration of the bump line according to the RSST.

 

 

permanente_warning_line_setup-2-1024x106.jpg

 

VSS SAFETYLINE

– for OSHA

In this configuration, the VSS SafetyLine must have one base per vertical post and the maximum spacing between two posts is 25′. This is the configuration of the bump line according to the OSHA (The Occupational Safety and Health Administration of United States Department of Labor).

 

 

 

A warning line systems with no perforation of the membrane

Maintaining the integrity of the waterproof membrane is essential to protect the building envelope. That’s why the VSS SafetyLine warning line systems is freestanding: its base acts as a counterweight, enabling it to comply with the permanent warning line standards.

 

Guaranteed durability

To eliminate rust, inevitable with a steel base, or the risk of breakage of a concrete base, our warning line systems use an eco-friendly and patented recycled rubber base. Extremely resistant to shock and temperature changes, these 50 lb bases provide maximum grip on all types of flat roofs.

 
 
 
 
 
 
 
Specification
value
Maximum distance between poles :
240″
---
---
---
---
---
---
---
---
---
---
---
---
---
Maximum length – start / end of line:
150″
---
---
---
---
---
---
---
---
---
---
---
---
---
Maximum cable height allowed:
39″ from the ground
---
---
---
---
---
---
---
---
---
---
---
---
---
Minimum cable height allowed:
34″ from the ground
---
---
---
---
---
---
---
---
---
---
---
---
---
Cable- Material :
steel, yellow nylon coating
---
---
---
---
---
---
---
---
---
---
---
---
---
Cable- Diameter
¼”
---
---
---
---
---
---
---
---
---
---
---
---
---
Flag – Material
yellow nylon
---
---
---
---
---
---
---
---
---
---
---
---
---
Maximum distance between each flag:
72″
---
---
---
---
---
---
---
---
---
---
---
---
---
Counterweight :
50 lb/base
---
---
---
---
---
---
---
---
---
---
---
---
---
Counterweight – Material :
recycled rubber
---
---
---
---
---
---
---
---
---
---
---
---
---
Railing and posts :
aluminum 6061-T6
---
---
---
---
---
---
---
---
---
---
---
---
---
Outside diameter
1,9″
---
---
---
---
---
---
---
---
---
---
---
---
---
Fittings – Material :
galvanized steel
---
---
---
---
---
---
---
---
---
---
---
---
---
Hardware / Material :
stainless steel
---
---
---
---
---
---
---
---
---
---
---
---
---
Tightening Torque :
30 lb/pi (CL201: 20 lb/pi)
---
---
---
---
---
---
---
---
---
---
---
---
---
Use :
permanent, temporary
---
---
---
---
---
---
---
---
---
---
---
---
---
Waranty :
10 years
---
---
---
---
---
---
---
---
---
---
---
---
---
Complies with :
CSTC: 2.9.4.1 and OSHA: 1926.502(f)
---
---
---
---
---
---
---
---
---
---
---
---
---

Warning Line Installation with Delta Prevention Non Penetrating Guardrails.

Results: The complete perimiter is protected

 

RED: Delta Prevention VSS Classic non-penetrating guardrail.

DARK RED:  Delta Prevention VSS Compact non-penetrating guardrail.

GREEN: VSS SafetyLine Warning Line

 

Accessories – Warning Line System

CL167.png

# ITEM : CL167

Material : galvanized steel

This dual connector connects two straight sections of a warning line.

 

CL168.png

90 ° Connector

# ITEM : CL168

Material : galvanized steel

This connector connects two warning line sections and creates a 90° corner.

 

CL173.png

Simple connector

# ITEM : CL173

Material : galvanized steel

This connector is used at the beginning and end of each permanent warning line. It can be installed on an independent vertical pole or on a Delta Prevention guardrail section.